MASTER OIL SERVICE KIT
MASTER OIL SERVICE KIT
Product Introduction
• FEATURES:
KIT INCLUDES USEFUL TOOLS WHEN WORKING ON OIL EXCHANGE SERVICES:
1. DRAIN PLUG REPAIR TOOL SETS IN
M13 X 1.5, M15 X 1.5, M17 X 1.5, M20 X 1.5, REPAIRS STRIPPED
OR WORN DRAIN PLUG HOLES ON OIL OR TRANSMISSION
PAN BY ENLARGING THE HOLES AND FIT WITH NEW DRAIN
PLUGS AND WASHERS.
2. MAGNETIC DRAIN PLUG TOOL
HELPS MECHANICS DRAIN HOT AND DIRTY ENGINE OIL
WITHOUT HAVING A DIRECT PHYSICAL CONTACT TO THE
OIL. SPECIAL MAGNET WITH STRONG ATTRACTION FORCE
AND HIGH TEMPERATURE RESISTANT (UP TO 120ºC / 248ºF)
3. PITCH GAUGE
HELPS MECHANICS DETERMINE A FASTENER’S DIAMETER,
PITCH AND LENGTH WITH MOST COMMON SIZES WITHOUT NEEDING
SEVERAL TOOLS AT HAND.
• SPECIFICATIONS:
• SPECIFICATIONS:
• INSTRUCTIONS
THE INSTRUCTION STEPS ARE ADVISED ACCORDING TO STANDARD OIL SERVICE PROCEDURES
- MAGNETIC OIL DRAIN PLUG TOOL
1. LOOSEN THE OIL DRAIN PLUG SLIGHTLY WITH A REGULAR WRENCH (FIG. 1)
2. FIT THE DRAIN PLUG TOOL TO THE SLIGHTLY LOOSENED DRAIN PLUG, AND THE MAGNET
WILL BE ATTRACTED TO THE DRAIN PLUG
3. TURN THE TOOL COUNTER CLOCKWISE (FIG. 2) AND THE OIL WILL GRADUALLY COME OUT OF
OIL PAN WITHOUT DIRECTLY CONTACTING MECHANIC’S HAND.
• PITCH GAUGE
FOR CHECKING THREADS
1. FIND A HOLE WITH A SIMILAR SIZE TO THE OBJECT (A BOLT, STUD OR SCREW TO BE
CHECKED) (FIG 4)
2. CONNECT THE OBJECT TO THE HOLE TO SEE IF THE HOLE MATCHES THE OBJECT
NOTE WHEN THE OBJECT THREADS MATCH HOLE THREADS, THE OBJECT CAN BE ROTATED
SMOOTHLY. IF ANY UN-SMOOTHNESS OCCURS, IT IS AN INDICATION THAT THE THREADS DO
NOT MATCH. CONNECTION WITH FORCE MAY CAUSE HOLE THREADS DAMAGED.
FOR CHECKING DIAMETER
1. POSITION THE OBJECT AGAINST THE INNERMOST PART OF THE V-SHAPE GROOVE
2. FIND THE POINT WHERE THE EDGES OF THE OBJECT AND THE GAUGE TOUCH EACH OTHER
(SEE THE ARROWS ON FIG 5), AND READ THE MARKING.
FOR CHECKING LENGTH
1.PLACE THE OBJECT ON BOTH SIDES OF THE GAUGE (SAE ON THE RIGHT AND METRICS ON THE LEFT).
2.ONE END OF THE OBJECT SHOULD ALIGN THE UPPER LINE OF THE GAUGE (FIG. 6 AND 7) AND READ
THE MARKING.
OIL DRAIN PLUG REPAIR
THIS STEP IS ONLY NECESSARY WHEN OIL DRAIN PLUG HOLE IS STRIPPED OR WORN.
1. USE THE TAP PROVIDED TO CREATE NEW THREADS AND PITCHES ON THE DRAIN
PLUG HOLE (FIG. 8)
2. CLEAN THE DRAIN PLUG HOLE AND ITS SURROUNDINGS TO REMOVE CHIPS IN THE OIL PAN
3. FIT THE NEW DRAIN PLUG AND WASHER WITH NEW SIZES TO DRAIN PLUG HOLE.
TRADITIONAL METHOD
USE WITH DRAIN PLUG TOOL
TRADITIONAL METHOD
USE WITH DRAIN PLUG TOOL
