NIBBLING TOOL

Contents:

• MATERIAL TO BE NIBBLED IS PLACED IN THE GAP BETWEEN THE
  PUNCH AND BLADE CHANNEL.
• BY SQUEEZING THE HANDLES TOGETHER, THE PUNCH WILL
  MOVE DOWN INTO THE CHANNEL, CUTTING OUT A SLUG OF METAL.
• A SCRIBE LINE CAN BE FOLLOWED BY LOOKING DOWN ON WORK
  IN THIS POSITION. A SLOT IS FORMED BY MAKING SUCCESSIVE CUTS.
• TO MAKE SHARP 90 DEGREE TURN, PULL THE TOOL OUT OF THE SLOT.
  TURN THE WORK 90 DEGREES AND INSERT THE TOOL AGAIN.
• BY TURNING THE TOOL BEFORE EACH CUT, A 5/16"(7.9 MM)
  MINIMUM RADIUS CAN BE CUT.
• ALMOST ANY SIZE OR SHAPE HOLE CAN BE CUT BY STARTING
  WITH A 3/8" (9.5 MM) HOLE.
• CUTS NON-HARDENED METALS AT 0.5-1.2 MM AND PLASTIC
  AT 0.5-1.6 MM. FOR INSIDE SHAPE, DRILL A 3/8" OR 9.5Ø HOLE
  FOR STARTING CUTS
  
  
• PACKING: SLIDE CARD