UNIVERSAL PRESSURE BRAKE BLEEDER ADAPTER - FASTENER TYPE
UNIVERSAL PRESSURE BRAKE BLEEDER ADAPTER - FASTENER TYPE
1. Place The Lower Plate On The Master Cylinder Reservoir’s Filler Neck (Fig. 1).
2. Place The Conical Rubber On The Master Cylinder Reservoir’s Opening (Fig. 2).
3. Insert The Upper Plate And The Bolts On The Reservoir (Fig. 3).
4. Fastens The Nuts On The Bolts Until Both Nuts Reach The Lower Plate.
5. Make Sure The Adapter Is Securely Connected On The Master Cylinder Reservoir (Fig. 4).
6. Performing A Low-pressure Leak Test Is Recommended Before Refilling Brake Fluid With High Pressure.
| NO. | NAME | SPECIFICATION |
|
1 |
Bolts (2 pcs) |
Hex 16mm, M8 x 1.25 |
|
2 |
Upper plate |
Thickness: 5mm / 0.2" |
|
3 |
Fluid connector |
90° angle |
|
4 |
Conical rubber |
Material: EPDM |
|
5 |
Lower plates |
Thickness: 4mm / 0.16" |
|
6 |
Nuts (2 pcs) |
OD Ø25mm, M8 x 1.25 |
Contents:
- 1 PC UNIVERSAL PRESSURE BRAKE BLEEDER ADAPTER - FASTENER TYPE
- PACKING: WHITE BOX + LABEL
